Gluing Instructions

Decoflex is a flexible veneer and a natural material product. Check all sheets prior to installation.

Applications: Decoflex can be glued on almost any substrate (PVC, Panels, metal,…). All gluing must be done according to the instructions of the glue supplier. - Decoflex must be stored in normal conditions. – Decoflex, glue and substrate should be stored in the same area for at least 48 hrs, prior to gluing.

Type of glue: Never use water based glue for manual application. – Read the instructions of the glue supplier. – For manual application: use contact glue (see gluing). – Gluing with press: use PVAC or ureaphormaldehyde glue.

Gluing: Ensure that all surfaces are dry, free of dust and grease. – Apply the glue to both surfaces. – Ensure that drying time of the glue is respected. – Position the Decoflex on the substrate. – Start to press from the middle of the sheets towards the sides, using a roller with 2 grips or a scraper. – It is necessary to leave 4 to 5 days between gluing and lacquering to let the glue sufficient drying time.

Finishing and checking: Remove the excess Decoflex. – Use light against the grain of wood to check the surface fore defaults. – Bubbles and ridges can be removed by using an iron.

Watch out for overheating and discoloration of the veneer. – Decoflex is pre-sanded with grit 150. Resand with grit 180 to obtain a smoother surface.

If doubts or questions: contact Decospan, your supplier or/and the glue supplier.