Grooves

Brushing: By brushing out the pores of the veneer with hard brushes we obtain a surface with more grain structure. Ideal to see a more pronounced grain after staining. Technical properties: Max width: 1240 mm Max length: 3500 mm Brushing on first application: 0.15mm depth (depending on wood species). This operation can be repeated several times to achieve greater depth.

Some solvent based lacquers may react with the glue used to joint veneer leaves, making the joint more visible to the eye. Therefore in order to avoid a potential problem we recommend that a test is carried out prior to full production.

V-groove: Wood veneered boards can be V-grooved in order to obtain a plank effect. Technical properties: Max. length: 2070 mm Max. width: 3050 mm Standard depth: 2 mm Standard width: 3 mm Number: on request: 1, 2 or 3 Intermediary distances: according to the customer’s wish Profile: standard V-groove (U-groove also possible) After this operation the wood veneer can be treated with lacquer/oil.
T-groove: Veneered MDF boards can also be T-grooved according to the profile desired by the customer. Technical properties: Max. length: 2070 mm Max. width: 3050 mm Profile: in accordance with customer’s wish Distances: following agreement The boards can be delivered cut to size: they can also be lacquered or oiled.